• Open the door of the heating chamber, press and hold down the
numeric button "1" for 5 seconds. The alarm will sound once and
the unit will enter the mode of programming automatic
operation - the message "PROGRAM" will appear on the display.
• Press the number keys in a combination in the range "0-99" to
select the preparation mode for the program under that
number. The display will show the default time and power level.
• Use the numeric buttons to define the required operating time
(maximum 60 minutes).
• Press the POWER LEVEL button and select the power level using
a number button in the range 10-0 (see the table in "Manual
setting of the meal preparation").
• Press the START button to save the settings under the previously
selected mode number. If STOP is selected instead of the START
button, the device will return to standby mode - the setting
selected at that time will not be saved.
ATTENTION: the automatic preparation mode saved in the
device memory will not be lost after a power failure.
3.3.14 Starting programmed meal preparation
• In standby mode, use the number buttons to select one of the
programmed cooking cycles under "0-99".
• Use the START button to start this mode.
3.3.15 Completion of meal preparation
After the set time of the manual or automatic program has elapsed,
the device will enter the cooking cycle end mode and an alarm will
sound (according to the pattern selected by the user). The display will
show the message "DONE".
3.3.16 Defrosting function
• In standby mode, press the DEFROST button.
• Use the number buttons to enter the defrost time (maximum:
99 min: 99 s).
• Use the START button to start the defrosting mode.
3.3.17 Doubling or tripling the amounts in the food preparation mode
• In standby mode, selecting the doubling X2 or tripling X3 button
will display the message "DOUBLE" or "TRIPLE".
• Use the number buttons to select the time to prepare a meal,
e.g. if you press the number button 5, it corresponds to 5
minutes, while in doubling or tripling mode it will be 10 (X2) or
15 (X3) minutes respectively.