Publicidad
Idiomas disponibles
Idiomas disponibles
Step 2
•
Attach the bottom shelf (H) to the legs (G) with (4) M8x16mm hex socket bolts (AA) and
(4) M8 washers (EE).
Note: Do not fully tighten the bolts. The legs and bottom shelf should be loose so they can be
aligned properly.
Now fully tighten all the bolts left loose from step 1 and the beginning to step 2.
•
•
Insert and thread casters (I) through the two legs and into the bottom panel holes on the
same side.
•
Insert and thread casters (J) through the other two legs and into the bottom panel holes on
the same side.
6
#6 Allen Wrench
Publicidad
