Zonair3D BUBBLE PURE AIR TEAM Manual De Usuario página 25

1- To access inside, unscrew the
8 M4 Philips screws
GRSYSTEM
Pre-filter
3- Identify filters
5 - After loosen the setscrews
that hold the absolute filter in
each corner, remove it by sliding
it carefully
In the event of high pollutant concentrations, filters may become clogged faster and
require a different filter replacement plan.
Contact Zonair3d or your local distributor for replacements.
IMPORTANT: It is important that only original filters supplied by Zonair3D are used to
ensure the desired result and correct operation of the equipment. The guarantee will
become void if filters other than those supplied by Zonair3d are used.
MANAGEMENT OF USED FILTERS
Contact your local waste manager regarding the correct disposal of used filters.
2- Remove the upper panel
Absolute
Filter
4 - Remove the pre-filter by
sliding it along the guides
6 - Remove the GRSystem by
sliding it
25 Bubble | Pure Air