Publicidad
Idiomas disponibles
Idiomas disponibles
Procedure:
Step 1: On the baseplate, there are three holes for the installation.
Step 2: Hold the baseplate onto the location where the device is to be installed.
Step 3: Mark the boreholes with a pen or a suitable tool.
Step 4: Drill the holes.
Step 5: Hold the baseplate in the desired position and tighten it.
Before taking into operation for the first time, the installation has to be approved by an expert!
OPERATION
After connecting the effect to the mains Lighting Star starts running.
Use the rotary control to adjust the speed of the built-in programs.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Maximum ambient temperature T
Maximum housing temperature T
Minimum distance from flammable surfaces:
Minimum distance to lighted object:
Dimensions (LxWxH):
Weight:
Please note: Every information is subject to change without prior notice. 03.12.2007 ©
DANGER TO LIFE!
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
:
a
(steady state): 60° C
B
230 V AC, 50 Hz ~
160 W
45° C
0.50 m
0.50 m
220 x 220 x 610 mm
1.7 kg
11/20
00026691.DOC, Version 1.2
Publicidad
