Descargar Imprimir esta página

Parkside Performance PKHAP 20-Li C3 Traduccion Del Manual De Instrucciones Originale página 19

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 113
Safety guidelines for battery
chargers
This appliance may be used by
children aged 8 years and above
and by persons with limited phys-
ical, sensory or mental capabili-
ties or lack of experience and
knowledge, provided that they
are under supervision or have
been told how to use the appli-
ance safely and are aware of
the potential risks. Do not allow
children to use the appliance as
a toy. Cleaning and user mainte-
nance tasks may not be carried
out by children unless they are
supervised.
The charger is suitable for
indoor use only.
WARNING!
To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or
a similarly qualified person.
ATTENTION!
This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/
PAP 20 A3/PAP 20 B1/PAP 20 B3/
PAPS 204 A1/PAPS 208 A1.
A current list of battery compatibility can be
found at www.lidl.de/Akku.
WARNING!
Do not use any accessories which are not
recommended by PARKSIDE. This can lead to
an electric shock and fire.
PKHAP 20-Li C3
Before use
Charging the battery pack
(see fig. A)
CAUTION!
Always unplug the appliance before you
remove the battery pack 5 from or connect
it to the charger.
NOTE
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C.
Connect the battery pack 5 to the high-speed
battery charger t (see fig. A).
Insert the power plug into the socket. The
control LED z lights up red to indicate that the
appliance is charging.
The green LED u indicates that the charging
process is complete and the battery pack 5 is
ready.
Push the battery pack 5 into the appliance.
Attaching/disconnecting the battery
pack to/from the appliance
Attaching the battery pack
Push the rotation direction switch 3 into the
middle position (lock).
Allow the battery pack 5 to click into the
handle.
Removing the battery pack
Press the release button 4 and remove the
battery pack 5.
GB │ IE
 7

Publicidad

loading