Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting on and removing from the digital
camera
Check that the digital camera is turned off. (Mounting the unit onto, or
0
removing it from, the camera while the power is on may cause trouble and is
not recommended.)
1
1 Remove the cover for the
battery grip connector on the
digital camera.
2 Store the cover for the battery
grip connector in the cover
storage of the Battery Grip.
3 Remove the terminal cap on the
Battery Grip.
Return the cover for the battery grip
0
connector and the terminal cap to
their original position after use to
protect the terminals.
Be careful not to lose the terminal
0
cap.
2
Insert by aligning the attachment
screw, electrical contacts, and
camera attachment pins.
3
Turn the attachment screw in
direction of the arrow to attach
securely.
Note
Keep the terminal cap out of reach of children to prevent swallowing.
0
∫ Remove the Battery Grip from the digital camera
Confirm that the digital camera is not powered, and turn the attachment screw
0
in the opposite direction of the attachment.
(ENG) DVQX2398
7
Publicidad
