Descargar Imprimir esta página

Magnusson 5063022087256 Manual Del Usuario página 43

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
Adding values
You can add two measurements to get a total measurement of the two 
distances.
1. Measure a length as described in the "Measuring single distance"
section.
2. Press the
displayed.
3. Press the measuring button
4. The result is shown in the main line and the measured value above.
Notes: This process can be repeated as required.
Subtracting values
You can subtract one measurement from another.
To subtract values, press the button
same as for the section on adding values.
63022087256_MNL_IN_V02.indd 43
63022087256_MNL_IN_V02.indd 43
button, the original distance and the + symbol will be
to start the next measurement.
. The subsequent steps are the
43
19/05/2023 4:32:04 pm
19/05/2023 4:32:04 pm

Publicidad

loading