Descargar Imprimir esta página

Samsung DVD-P181 Manual Del Usuario página 27

Ocultar thumbs Ver también para DVD-P181:

Publicidad

Idiomas disponibles

Idiomas disponibles

REFERENCE
REFERENCE
Firmware upgrade
Introduction
Samsung will often support the software upgrade
to improve the performance of this unit to the
lastest status , trough samsung Internet
Site(www.samsung.com)
Because the specially new mpeg4 codec conti-
nuse and it is appearing.What improvements are
made depends on the upgrade software your are
using as well as the software that your DVD-play-
er contained before the upgrde.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
You have to download a new file trough Download
1.
center of Samsung Internet Site (http://www.sam
sung.com).
Write the file to disc using CD-RW driver of your
2.
computer.
Note
- File system CD-ROM
- Chracteer set ISO 9660
- Finalized, single session
- Write speed low
Update procedure
1.Open the disc tray. Place disc the on the tray.
close the tray. The Firm ware Upgrade sreen
appears.
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
Firmware upgrade
appears on the display
2.Press enter or play to start upgrade.
- Other key to cancel upgrade back to sam-
sung logo and eject the disc.
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
File copying
Firmware upgrade starts
Upgrade file detected
Curent version: 07.12.15.00
Upgrade ?
Press Play to start
Upgrade
- In the middle of the writing, the tray will open
automatically. After taking out the disc, please
wait for about 2 minutes.
- If the unit was succesfully update, the unit will
turn off and on after closing the tray automatically.
When the unit turns on, this screen will display.
3.Press the number buttons to select the
desired language
Note
- If the "Select Menu Language"doesn't appear,
please contact to "Samsung Service Center- If
the unit was succesfully update, the unit will
turn off and on after closing the tray automatical
- Do not press any button and plug the power code
during upgrade.
- The upgrade procedure may change, refer to the
web site( www.samsung.com)
Firmware upgrade starts
SELECT MENU LANGUAGE
Press
1
for English
Touche
2
pour Français
Drücken Sie
3
für Deutsch
Pulsar
4
para Español
Premere
5
per Italiano
Druk op
6
voor Nederlands
27

Publicidad

loading