Motorola Solutions EVX-261 Manual De Funcionamiento página 19

voX a -t
nti riP
VOX Anti-trip prevents the transceiver from activating a
VOX transmission from either internal or external radio
alert tones (radio beeps).
e
mergency
Emergency can either be programmed in analog or digital
mode. When the emergency key is pressed, activate the
pre-programmed functions programmed using CE156
software by your Motorola Solutions authorized dealer,
and requests the assistance. For further details of the pre-
programmed function, contact your Motorola Solutions
dealer. This function can not be assigned to a Long Press
(LP) key function.
To revive the radio from the Emergency mode, just press
again the assigned PF key or turn off the radio.
l W
one orKer
Toggle the Lone Worker feature "On" and "Off".
The Lone Worker feature is designed to emit an alarm for
30 seconds when the Lone Worker Timer (programmed by
your Motorola Solutions dealer) has expired. If the user
does not reset the timer by pressing the PTT switch, the
radio switches to Emergency mode.
EVX-261 O M
pErating
a
dvanced
anual
o
Peration
Pri-2 s
et
Sets the current channel to the priority channel.
Note: If you do not set the priority channel, the Dual
Watch feature will not work.
Pri-2 d
isable
Disable the priority channel.
Note: If you disable the priority channel, the Dual Watch
feature will not work.
s
can
The Scanning feature is used to monitor multiple chan-
nels programmed into the transceiver. When scanning, the
transceiver will check each channel for the presence of a
signal and will stop on a channel if a signal is present.
Note: Your dealer may have programmed your radio to
stay on one of the following channels if you press the
PTT switch during scanning pause:
 "Scan Pause" channel ("Talk Back")
 "Last Busy" channel
 "Priority" channel
 "User Programmed" channel ("Select Channel")
 The channel the CH selector knob is currently
tuned to.
17