Publicidad
Idiomas disponibles
Idiomas disponibles
3 Select the item and press [ENT].
The editing screen for the selected item appears.
You can register or edit the name, Callsign, and memo, etc.
4 Press [ENT] after editing.
Editing are completed and the Callsign list editing screen
appears.
5 Press [A/B].
The Callsign list selection screen appears.
Sorting the Callsign
You can sort the Callsign list.
1 Press [MODE] in the Callsign list selection screen.
The move position selection screen appears.
2 Select a move position and press [A/B].
When you move an item to the end of the list, select [Move
to End] and press [A/B].
DIRECT REPLY
This function allows you to reply to a received call by simply
pressing [PTT] while displaying the interrupt screen in DV
and DR mode. The default setting is
signal is received in a DR mode and you immediately reply
to a CQ or a call to your Callsign, the transmission setting
is temporarily changed automatically and you can reply by
simply pressing [PTT].
The <
> icon appears in the interrupt screen when a direct
reply is possible in receiving a call. If [PTT] is pressed when
this icon appears, the setting is automatically changed to the
reply setting and transmission becomes possible.
Entire interrupt screen
Half interrupt screen
Note:
¡ The change of the transmission setting are temporary. After display
hold time elapses, it returns to the previous transmission setting.
¡ When receiving the repeater frequency in DV mode, you can not
reply to a received call by pressing [PTT].
Setting Direct Reply to Off
1 Access Menu No. 612.
On
. When a repeater
[
]
2 Select [Off].
Note:
¡ You can change the display hold time by Menu No. 643.
¡ Direct reply is not possible when display method (Menu No. 640) is
set to [Off].
¡ When the direct reply is set to [On], the interrupt screen of DV and
DR mode is displayed in priority than APRS mode.
CALL HISTORY
You can call easily by setting the received party to the
destination from a Call History even if you do not use a direct
reply function.
Up to 20 TX History and 100 RX History can be stored as
a Call History in DV and DR mode. The Call History is not
cleared when the power is switched [Off].
1 Press [MODE] to enter DR mode.
2 Press [ENT] (1s).
The Call History screen appears.
3 Select a list and press [ENT].
The transmission setting is changed and returns to the
frequency screen.
Note:
¡ Pressing [ENT] (1s) does not work in DV mode. Press [F],
[MODE], select [Destination Select] in the Digital Function Menu,
and select Call History.
D-STAR
39
Publicidad
