Descargar Imprimir esta página

CASO DESIGN WK 2100 Manual Del Usuario página 35

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 83
17 Troubleshooting
This chapter provides you with important notices with regard to operating the device.
Observe the following notices to avoid dangers and damages:
► Only qualified electricians, who have been trained by the manufacturer, may carry out
any repairs on electrical equipment.
► Improperly performed repairs can cause considerable dangers for the user and
damages to the device.
Problem
The device switches off before
boiling or before it has
reached desired temperature.
The device does not switch
off.
The device cannot be
switched on.
18 Disposal of the Old Device
Old electric and electronic devices frequently still contain valuable materials. However,
they also contain damaging substances, which were necessary for their
functionality and safety.
If these were put in the non-recyclable waste or were handled incorrectly, they
could be detrimental to human health and the environment. Therefore, do not
put your old device into the non-recyclable waste under any circumstances.
Utilise the collection point, established in your town, to return and recycle old electric
and electronic devices. If necessary, contact your town hall, local refuse collection
service or your dealer for information.
Ensure that your old device is stored safely away from children until it is taken away.
19 Guarantee
We provide a 24 month guarantee for this product, commencing from the date of sale, for
faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain unaffected
by this.
Attention
Cause
Too much scale in the
pot.
The lid is not closed
correctly, the mesh is not
inserted correctly.
The device has not
cooled down sufficiently.
Please note
Solution
Descale the device.
Close the lid correctly. Place
the mesh into device
correctly.
Allow the device to cool
down.
35

Publicidad

loading