Zycoo SC10 Guía De Instalación Rápida página 3

Installation Method
1
Use a tool to open a hole in the ceiling with a diameter of 170mm.
2
Connect the PoE+ cable or network cable to the device and connect the power supply.
3
If you are using any peripheral devices, connect them now.
4
Remove the grille from the device and set it aside.
5
Carefully insert the device through the mounting hole in the ceiling, and adjust the position
of the clip using the clip screw so that it can clamp onto the ceiling.
6
Use the four screws to secure the device in place, making sure the four clips are tightened
firmly against the ceiling.
7
Replace the grille to cover the device.
Ceiling
English
φ170mm
Grille
1