Publicidad
Idiomas disponibles
Idiomas disponibles
6. Close the fasteners on the circumference of the protec-
tive grid.
7. Secure the protective grid with the fastening screw and
the nut.
Position
The ideal position is a non-slip, flat surface.
Putting into Service
Electrical Connection
• Before inserting the plug into the socket. Make sure that
the mains voltage to be used matches that of the device.
You can find this information on the nameplate.
• Connect the device to a duly installed protective contact
socket.
Use
Basic Settings
Set the blower inclination angle before starting the device.
1. Unscrew the small knurled screw.
2. Tilt the protective grid into the desired position.
3. Re-tighten the knurled screw.
Operation
To select the speed, use the rotary switch on the rear:
• 0
off
• I
slow
• II
medium
• III
fast
To shut off the device, select the position 0.
Fan Setting
You have two options:
Stationary
1. Shut off the device.
2. Pull the control knob upwards.
3. Use the carrying handle to place the device into the
desired position.
Oscillating
1. Shut off the device.
2. Press the control knob.
NOTE:
The device rotates automatically in the range of about
70 degrees.
3. To turn off the function, shut off the device and pull the
control knob upwards.
Cleaning
WARNING:
• Always remove the mains plug before cleaning the
device.
• If you need to remove the safety guard: Always switch
the device off and remove the mains plug.
• Under no circumstances should you immerse the
device in water for cleaning purposes. Otherwise this
might result in an electric shock or fire.
CAUTION
• Do not use a wire brush or any abrasive items.
• Do not use any acidic or abrasive detergents.
• Clean the outside of the device with a dry cloth without
any additives.
• If the device is very dirty wet a cloth with water and then
wipe the device dry once you have finished.
Maintenance and Storage
• Clean the appliance as described.
• We recommend that the appliance is kept in its original
packaging if you do not intend to use it for long periods.
• Always store the appliance out of the reach of children, in
a well-ventilated and dry place.
Technical Data
Model: ........................................................................PC-VL 3063 M
Power supply: .........................................................220-240 V, 50 Hz
Power consumption:.................................................................35 W
Protection class: .................................................................................I
Net weight: ................................................................approx. 3.0 kg
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
English
27
Publicidad
