Worx WX252 Manual Original página 7

b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard
hat, or hearing protection used
for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position before
connecting to power source
and/or battery pack, picking
up or carrying the tool. Carrying
power tools with your finger on
the switch or energising power
tools that have the switch on
invites accidents.
d) Remove any adjusting key or
wrench before turning the
power tool on. A wrench or a key
left attached to a rotating part
of the power tool may result in
personal injury.
e) Do not overreach. Keep
proper footing and balance
at all times. This enables better
control of the power tool in
unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair, clothing and
gloves away from moving
parts. Loose clothes, jewellery or
long hair can be caught in moving
parts.
g) If devices are provided for the
connection of dust extraction
and collection facilities,
ensure these are connected
and properly used. Use of dust
collection can reduce dust-
related hazards.
h) Do not let familiarity gained
from frequent use of tools allow
you to become complacent and
ignore tool safety principles. A
careless action can cause severe
injury within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool.
Use the correct power tool for
your application. The correct
power tool will do the job better
and safer at the rate for which it
was designed.
b) Do not use the power tool if
the switch does not turn it
on and off. Any power tool that
cannot be controlled with the
switch is dangerous and must be
repaired.
c) Disconnect the plug from
the power source and/or
the battery pack from the
power tool before making
any adjustments, changing
accessories, or storing
power tools. Such preventive
safety measures reduce the
risk of starting the power tool
accidentally.
d) Store idle power tools out of
the reach of children and do
not allow persons unfamiliar
with the power tool or these
instructions to operate the
power tool. Power tools are
dangerous in the hands of
untrained users.
e) Maintain power tools. Check
for misalignment or binding
of moving parts, breakage of
parts and any other condition
that may affect the power
EN
7