Worx WX252 Manual Original página 9

replacement parts. This will
ensure that the safety of the
power tool is maintained.
b) Never service damaged
battery packs. Service of
battery packs should only be
performed by the manufacturer
or authorized service providers.
SCREW DRIVER AND IMPACT
WRENCH SAFETY WARNING
1. Hold power tool by insulated
gripping surfaces, when
performing an operation
where the fastener may
contact hidden wiring.
Fasteners contacting a "live"
wire may make exposed metal
parts of the power tool "live" and
could give the operator an electric
shock.
SAFETY WARNINGS FOR BATTERY
CELLS INSIDE THE TOOL
a) Do not dismantle, open or shred
cells.
b) Do not short-circuit charging
terminal. Do not store power
tool haphazardly in a box
or drawer where charging
terminal may short-circuit each
other or be short-circuited by
conductive materials. When
power tool is not in use, keep it away
from other metal objects, like paper
clips, coins, keys, nails, screws or
other small metal objects, that
can make a connection from one
charging terminal to another.
c) Do not expose power tool to
heat or fire. Avoid storage in
direct sunlight.
d) Do not subject power tool to
mechanical shock.
e) In the event of battery leaking,
do not allow the liquid to come
into contact with the skin or
eyes. If contact has been made,
wash the affected area with
copious amounts of water and
seek medical advice.
f) Keep power tool clean and dry.
g) Wipe the charging terminals
with a clean dry cloth if they
become dirty.
h) Power tool needs to be charged
before use. Always refer to this
instruction and use the correct
charging procedure.
i) Do not maintain power tool on
charge when not in use.
j) After extended periods of
storage, it may be necessary to
charge and discharge the power
tool several times to obtain
maximum performance.
k) Recharge only with the charger
specified by Worx other than
that specifically provided for
use with the equipment.
l) Keep power tool out of the reach
of children.
m) Retain the original product
literature for future reference.
n) Dispose of properly.
o) Do not mix cells of different
manufacture, capacity, size or
type within a device.
p) Do not use any cell which is
not designed for use with the
equipment.
q) Keep the battery away from
microwaves and high pressure.
EN
9