Steren INT-230 Manual De Instrucciones página 15

Ocultar thumbs Ver también para INT-230:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTALLING INTERCOM
It is recommended that you install the camera at a height of 4.5 – 5
feet.
1. Select the location where you want to install the intercom and
make corresponding drilling according to the plastic sheet. Then
set the plate with screws.
2. Put a cable from intercom buzzer according to the corresponding
number, according to connection diagram. (From intercom 1 the
input 1, 2, 3 and 4 is connected to input 1, 2, 3 and 4 intercom 2
and assume both input 1, 2, 3 and 4 of intercom 3 and in turn to
entry 1, 2, 3 and 4 bell).
In case of an electric lock (not included), connect the cables in
5 and 6 door bell connectors.
3. Hold the intercom at the plastic base previously installed.
4. Connect the power cord to an electrical outlet near the intercom.
15

Publicidad

Tabla de contenido
loading

Tabla de contenido