ASROCK ConRoe945PL-GLAN Manual Del Usuario página 7

CAUTION!
1. This motherboard supports FSB800-CPU. If you plan to adopt Core
Duo CPU on this motherboard, you can only adopt Conroe 800 E4XXX
processors.
2. About the setting of "Hyper Threading Technology", please check page 29
of "User Manual" in the support CD.
3. This motherboard supports Untied Overclocking Technology. Please read
"Untied Overclocking Technology" on page 21 for details.
4. This motherboard supports Dual Channel Memory Technology. Before you
implement Dual Channel Memory Technology, make sure to read the
installation guide of memory modules on page 12 for proper installation.
5. Although this motherboard offers stepless control, it is not recommended
to perform over-clocking. Frequencies other than the recommended CPU
bus frequencies may cause the instability of the system or damage the
CPU.
6. While CPU overheat is detected, the system will automatically shutdown.
Before you resume the system, please check if the CPU fan on the
motherboard functions properly and unplug the power cord, then plug it
back again. To improve heat dissipation, remember to spray thermal
grease between the CPU and the heatsink when you install the PC system.
7. For microphone input, this motherboard supports both stereo and mono
modes. For audio output, this motherboard supports 2-channel, 4-channel,
6-channel, and 8-channel modes. Please check the table on page 3 for
proper connection.
8. Before installing SATAII hard disk to SATAII connector, please read the
"SATAII Hard Disk Setup Guide" on page 20 to adjust your SATAII hard disk
drive to SATAII mode. You can also connect SATA hard disk to SATAII
connector directly.
9. Power Management for USB 2.0 works fine under Microsoft
TM
Vista / XP 64-bit / XP SP1 or SP2 / 2000 SP4.
® ®
10. Microsoft Windows Vista
our website in the future. Please visit our website for Microsoft
Windows ® Vista TM driver and related information.
ASRock website http://www.asrock.com
ASRock ConRoe945PL-GLAN Motherboard
TM
driver is not ready yet. We will update it to
TM
2
® ®
Windows
®
7 7 7 7 7