BEARWARE 302360 Manual página 6

Thank you for choosing a BEARWARE product. Please read the following user man-
ual carefully so as to get the most from the product you have purchased.
1. Scope of delivery
• Timer
• User manual
2. Technical data
Electric voltage
Maximum load
IP degree of pro-
tection
Ambient temper-
ature
Features
3. Commissioning
Take the device out of the package and remove all the packaging material. In this
timer, the 24 hours of a day are divided into 96 blue sliders which are circularly
arranged on the front of the device for the time. You can set the time for which
current should flow individually.
The outer ring represents the time of day in hours with the values 1-24 and is fixed
to the sliders. Thus, the time indicated on the outer ring is associated with the
adjacent slider.
Push one of the sliders into the timer and the current does not flow for the ap-
propriate time. If a slider is at the outer position, the device is switched on for the
corresponding time period.
After adjusting the time ranges as per your needs, it is necessary to set the current
time of the day. Rotate the outer ring of the timer in a clockwise direction till the
black arrow on the front of the product points to the value of the inner ring, which
corresponds to the time of the day.
6
230V AC, 50Hz
16(4)A / 3680W
IP44 (only when used with type F plug with splash
proof collar)
+ 0-3°C until 35-40°C
• Manual setting using a separate switch
• Setting in 15-minute increments
English