Zipper ZI-EWB500LI Instrucciones De Servicio página 24

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
2. Step
First disassemble the 2 nuts (4) attached to both
sides of the motor wheel (1).
Mount the motor wheel (1) with 2 nuts (4) on the
support frame (2).
Note:
The wheel must be assembled so that the cable (3)
is placed on the right side.
3. Step
Guide the cable (1) of the motor wheel into the rail
(2) provided for this purpose on the support frame
(3).
Fix the cable (1) with cable ties.
Fasten the cable (4) to the right handle (R) using
cable ties (5).
4. Step
Assemble the support (1) to the handles (L, R)
using one long hex screw (2), 2 washers (3), one
spring washer (4) and one nut (5) each.
5. Step
Assemble the tray (1) using 4 round-headed
screws (4), 4 washers (3) and 4 nuts (2).
ASSEMBLY
24
ZI-EWB500LI