All settings from the receiver are mirrored into the software. Once you have set the receiver, there is no need to make
any setting changes on the PC. However, modifications can easily be made through the EasyWeather software if
needed. Those modifications will automatically be saved into the receiver.
Note that the
displayed.
o Function Button
Press
to display the function window.
This window enables you to modify all the functions of the receiver as well as enable or disable the corresponding
alarm functions. Edit as desired and click [Save] or [Cancel].
o Alarm Button
Press
to display the alarm window.
This window enables you to set the alarm time, and the high and low alarm of the receiver. Edit as desired and click
[Save] or [Cancel].
WS1080_v8
icon is displayed when the receiver is connected to your PC. Otherwise, the
8
icon will be
VELLEMAN