Descargar Imprimir esta página

Braun Silk-epil 9 Flex 100 Manual Del Usuario página 10

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
Unlocking can also be done via charging.
Speed button
Press the speed button (5) to switch
between
Speed II: power mode (default) and
Speed I: gentle mode
How to replace heads
Turn off the appliance, press the release
button (7) and take off the head. Attach a
different one.
Charging
Before use, charge the appliance for
2 hours using the power supply (8).
Charging light (6)
Flashing white:
White for 5 seconds: fully charged
Yellow:
Flashing yellow:
Operation time is up to 50 minutes when
used within 24 hours after charging.
Recharge when the yellow charging light
comes on or when the motor has stopped
completely. A 15-minute quick charge will
provide 10 minutes operation time.
The best temperature range for char-
ging, using and storing the appliance is
between 15 °C and 35 °C. Beyond this
range, charging might take longer.
The built-in rechargeable battery can be
replaced at an authorized Braun Service
Centre when it has reached the end of its
useful life.
Epilation (A)
Tips for beginners
• If you have not used an epilator before,
it may take some time for your skin to
charging in
progress
approx. 15 min
charge left
please recharge
adapt to epilation. In the beginning,
epilate on a weekly basis to help
reduce the discomfort.
• First time users should epilate in the
evening so that reddening can disap-
pear overnight. To relax the skin, we
recommend applying a moisturizing
cream after epilation.
• Epilation is easier and more comfor-
table when the hair is between 0.5 –
3 mm long. If hairs are longer, we
recommend that you shorten them.
• Exfoliation avoids ingrown hairs and
provides optimum conditions for
epilation.
• We recommend using the massage
cap with the SensoSmart function
activated.
Getting prepared
Dry usage: Your skin must be dry and
free from grease or cream.
Wet usage: Make sure your skin is very
moist to achieve optimum gliding condi-
tions for the appliance.
Make sure that the epilation head (2) is
clean and provided with a cap.
How to epilate
Always stretch your skin while epilating.
Guide the appliance in a slow, continu-
ous movement without pressure against
the hair growth in the direction of the
light.
Depending on model, there are various
epilation caps available:
Massage cap (1a):
for best comfort
Skin contact cap (1b):
for increased efficiency
Legs:
When epilating behind the knee, keep
the leg stretched out straight.
Sensitive areas:
First thoroughly clean and carefully dry
sensitive areas to remove residues (like
11

Publicidad

loading