Publicidad
Idiomas disponibles
Idiomas disponibles
Hiding the Unused Channels
Make sure you are not in a channel group before the step no.1.
Only the desired quantity channels will be visible. Repeat the same procedure to set a new quantity
of active channels.
Adding Channels to Groups
Checking Channels added into the Groups
Hiding the Unused Groups
Only the desired quantity of groups will be visible. Repeat the same procedure to set a new
quantity of active groups.
Disable Setting Functions (Lock mode)
A lock icon
is displayed on the screen when the lock mode has been set. Under this mode,
dual-button operation is not allowed and the motor configuration can not be modified. This function
should be set once the motor programming is completed to avoid any unwanted configuration change.
Repeat the same procedure to unlock the setting function.
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
09
vertilux.com
Publicidad
