Publicidad
Idiomas disponibles
Idiomas disponibles
Turn ON/OFF Motor Charging Led
The led on the motor head will blink 3 times every 8 seconds when the battery is low. Once
the charger is connected, the LED will blink 6 times during the charging time. The LED turns
solid blue when the battery is fully charged. Turning OFF the charging LED is recommended
when motors are powered by solar panels.
1.
2.
3.
Resetting the Motor to Factory Settings
Press and Hold the H button on the motor head for 16 seconds until the motor jogs four
times, then release it. All the motor settings will be deleted.
H button
Resetting the remote to factory settings
Press and hold the T and FAV
shown if you have a remote with display).
Remote Low Battery Notification
The remote shows a notification when its battery is below 2.7V DC
Models with Led Channel Indicator
Led no.6 will turn solid orange when you press any button.
Models with Display
The battery icon will be shown on the display when you press any button.
The following functions are only available for Bidirectional Motors and Remotes
with Display. Applies to models: 6-800-AT-ESB16 & 6-800-AT-ESBT6
Moving the Shade to a Percentage Opening
100% Shade completely close. 0% Shade completely open.
08
vertilux.com
Jog x1
Jog x1
buttons at the same for about 10 seconds. (
T
&
Button
PRESS x 10s
Jog x1
Jog x1
Reset
FAV
Button
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
Factory
Settings
will be
Publicidad
