Vertilux 6-800-MB-25B01 Manual De Programación página 5

Reversing the direction of rotation (if needed)
By default, the motors are set to be installed on the right side. If required, please reverse
their direction.
1.
Setting the Upper Limit
1.
2.
Up or Down
Setting the Lower Limit
1.
2.
Up or Down
Adjusting Upper or Lower Limits
1. Move the shade to the previously set upper or lower limit position by using
the remote control.
2. Press the UP and FAV buttons at the same time (to modify the upper limit)
or DOWN and FAV buttons at the same time (to modify the lower limit) until
the shade jogs once.
3. Move the shade to the new upper or lower limit position.
4. Press UP (for the upper limit) or DOWN (for the lower limit) and FAV
buttons at the same time for about 2s until the shade jogs twice.
Current Limit
Position
Up or Down & Fav x2s
04
vertilux.com
Up or Down x6
Desired
Upper Limit
Desired
Lower Limit
Up or Down & Fav
Jog x2
Jog x1
Up & Fav x2s
Down & Fav x2s
Jog x1 Up or Down
New Limit Set
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
Direction reversed
Upper Limit Set
Jog x2
Lower Limit Set
Jog x2
New Limit
Position