Vertilux 6-800-MB-25B01 Manual De Programación página 6

Deleting all Limits
1.
2.
3.
Button
Setting the Favorite Position
1.
2.
Desired Favorite
Favorite position can only be set if the lower and upper limits were previously set. Press the
Favorite Button
Fav
Deleting the Favorite Position
Shade is at
Favorite Position
Adjusting the Motor Speed
1. Press the P button on the back of the remote until the shade jogs once.
2. Press the STOP button until the shade jogs once.
Increasing the Motor Speed
3 . Within 3 seconds of Step 2, press the UP button. The shade will jog and the motor
a
will increase its speed. If the shade does not jog, the maximum speed is already set.
Decreasing the Motor Speed
3 . Within 3 seconds of Step 2, press the DOWN button. The shade will jog and the motor
b
will decrease its speed. If the shade does not jog, the lowest speed was already set.
There are 3 speeds to choose from: Slow, Medium, and Fast. The higher the speed, the louder the motor. The default motor
speed is the medium speed.
© 2023. Vertilux, Ltd. All Rights Reserved. Last revised: July 2023.
Jog x1 Stop
Fav & Stop x2s
Position
to move the shade up to the favorite position once it is set.
Fav & Stop x2s
Jog x1 Stop
Button
Jog x1
Button
Favorite Position Set
Jog x2
Favorite Position Deleted
Jog x1
Up
Jog x1
Down
Limits
Deleted
Jog x1
Speed Increased
Speed Decreased
vertilux.com
05