Publicidad
Idiomas disponibles
Idiomas disponibles
b. Press the ALARM SET button, "
the ALARM SET button again, the alarm time will blink on the display.
c. Press function button to choose "CD" icon.
d. Press the
e.
Press the
f.
The CD will play on at the set alarm time.
Note: Please make sure the disc already put into the CD compartment.
Note: Please make sure the disc already put into the CD compartment.
AL2 setting is same as AL1 setting
SHUT OFF ALARM:
When alarm goes off, press the STANDBY BUTTON to turn off alarm, the alarm will reset for next
day
HOW TO TURN OFF THE ALARM
To cancel alarm mode:
In "STANDBY OFF" mode, press AL.SET button to turn off the alarm function.
alarm sign "
" will disappear on the LCD Display).
ADJUST VOLUME
• Press VOL.+ button to increase the volume.
• Press VOL. – button to decrease the volume.
RADIO OPERATION
1. Press the STANDBY Button to switch on the unit.
2. Press the FUNCTION Button to the RADIO Function.
3. How to use the buttons for radio
i. Manual Tuning
Press the
or
selected by pressing the
button
ii. Automatic Tuning
a) Press & hold the
b) When a station of sufficient strength has been found Tuning will stop or you can stop the
automatic tuning by pressing
4. To turn off the radio, Press the STANDBY button.
PRESET TUNING
1. Select your desired station according to the normal tuning procedure.
2. Press the MEMORY button on the remote, "P-01" will appear and flash on the display, Then
use M-UP or M-DN- button on the remote or press the M+ / M- button on the unit to change
the number where the station will be stored. (P01 to P20) to change the number where the
station will be stored. (P01 to P20)
3. Store the current frequency by pressing MEMORY button on the remote again when you get
the desired number.
4. Repeat the same procedure to set other desired frequencies into Memory No.1 to No.20
Note: The unit can be preset up to 20 stations.
MEMORY RECALL
Recall the stored frequencies by pressing M-UP or M-DN BUTTON on the unit, or press the M+ /
M- button on the unit to select 1 to 20 stations as desired
NOTE: As stored frequencies can only be stored for long time with the power supplying. The
station you stored will be lost and can not be recalled in case that you cut off the power.
1" icon will blink on the display, then press and hold
BUTTON to set desired alarm hour.
BUTTON to set desired alarm minute.
button to search for desired frequency. Higher frequency can be
button while Lower frequency can be selected by pressing
or
button until the display frequency starts run
or
button.
ENG-6
(until
Publicidad
