REVERSE/FORWARD
1. The CD Reverse
number or to scan disc tracks at high speed.
2. Press the CD Reverse
two or more times to hear previous tracks on the disc.
3. Press the CD
4. Press and hold the
the previous track(s); When the desired track section is found, release the button and
normal play will resume.
5. Press and hold the
next track(s); When the desired track section is found, release the selected button and
normal play will resume.
PROGRAM FUNCTION
The Program feature can be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the PROG/TIME SET Button, LCD
Display will show the wording "PROGRAM 01" and "PROGRAM 01" starts to flash.
2. Press the
3. Press the PROG/TIME SET BUTTON to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode), press the
number and the "PROGRAM" appear on LCD Display.
6. Press the
track.
Note: After all of the programmed tracks have played, the CD player will return to the stop
mode.
7. To clear the programmed tracks from memory, press STOP Button until "PROGRAM" icon
disappeared.
AUX INPUT JACK
1. Touch the STANDBY button to turn on the unit.
2. Touch the FUNCTION button to AUX mode
3. Connect the AUX connect wire from the out jack of your Personal Player such as portable
MP3 player to the AUX input jack.
4. Play Start from your Personal Player.
HEADPHONE JACK
This unit will accept stereo headphones with a Ф 3.5mm plug. Before connecting the
headphones set the volume to minimum level as not to damage your ears or the headphones.
Connect the headphones to the headphones jack. The speakers will be automatically
disconnected.
Warning: Prolonged exposure to high sound levels may permanently damage your hearing. You
may not hear some warning sound while wearing these headphones.
SNOOZE FUNCTION
If you want to snooze a few more minutes press the SNOOZE BUTTON on the remote will
deactivate the sound for approximately 9 minutes.
and CD Forward
button once to hear the beginning of the current track. Press it
button to hear the next track on the disc.
Button, the current track will be scanned and move backwards to
Button, the current track will be scanned and move forward to the
or
button to allocate the desired track.
button to hear the previous or press the
Buttons can be used to jump to a different track
buttons to hear next program
ENG-8
BUTTON. The track