Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. For service, bring the product to an
authorised service centre for repair. When servicing, use
only original replacement parts.
■
Switch off and remove the battery pack before
conducting any maintenance or cleaning work.
■
You may make adjustments and repairs described in
this manual. For other repairs, contact an authorised
service centre.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure that the product is in safe
working condition.
■
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, or
grease.
■
Do not at any time let brake fluids, gasoline, petroleum-
based products, or penetrating oils, come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
NOTE: To ensure long and reliable service, carry out the
following maintenance regularly.
■
Check for obvious defects such as loose, dislodged, or
damaged blade; loose fixings; and worn or damaged
components.
■
Check if the covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using the product.
■
Always clean the cutting blades after operation.
■
Visually check the condition of the cutting edges of the
cutting blade. Any damaged blade should be properly
repaired or replaced by an authorised service centre.
■
Store the product and make sure the cutting mechanism
has stopped before setting the product down.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■
injury caused by vibration
–
Always use the right tool for the job, use designated
handles and restrict working time and exposure.
■
injury caused by contact with blades
–
Ensure that the blade protectors are fitted when the
product is not in use. Keep hands and feet away
from the blades at all times.
■
injury caused by thrown-out pieces of the workpiece
(wood chips, splinters)
4
| English
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud's Syndrome
in certain individuals. Symptoms may include tingling,
numbness, and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking, and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■
Keep your body warm in cold weather. When operating
the product, wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud's Syndrome.
■
After each period of operation, exercise to increase
blood circulation.
■
Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your physician about
these symptoms.
WARNING
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 137.
1. Cutting blade
2. Handle housing
3. Lock out trigger
4. Trigger
5. Blade sheath
6. Hook
SYMBOLS ON THE PRODUCT
Safety alert
Please read the instructions carefully
before starting the product.
Wear eye, ear, and head protection.
Wear non-slip, heavy-duty protective
gloves when handling the pole pruner
and the blade.
Wear non-slip safety footwear when
using the product.
Publicidad
