Descargar Imprimir esta página

VITO PRO POWER VIAG25 Manual De Instrucciones página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

Whenever the tank is full, stop the vacuum cleaner and
empty.
When vacuuming dust or solid waste:
1. Switch off the vacuum cleaner;
2. Undo the fastening latches (10) and remove the vacuum
cleaner head;
3. Pour the tank waste into a bag or box for disposal;
4. Once empty, place the tank on a vertical position and
also the filter bag;
5. Refit the vacuum cleaner head and switch it on again.
When vacuuming liquids:
1. Switch off the vacuum cleaner;
2. Undo the fastening latches (10) and remove the vacuum
cleaner head;
3. Remove the fluid drain port cap (2);
4. Empty the waste into a container;
5. Refit the vacuum cleaner head and switch it on again.
When performing maintenance or cleaning on the cleaner,
turn the power switch off and unplug the power cord.
When the filters are dirty, the suction power decreases
considerably. Clean them regularly to increase its efficiency
and extend the vacuum cleaner service life. Never operate
the vacuum cleaner without a filter installed.
1. Undo the fastening latches (10) and remove the vacuum
cleaner head;
2. Remove the filters, rinse with water until clean. Leave it
to dry;
3. Place the filters and assemble the other components in
reverse order of disassembly. The filters should be
installed dry.
Cleaning
After each use, clean all the components of the drywall
vacuum cleaner. Clean the vacuum cleaner with a clean,
damp cloth and blow it out with compressed air at low
pressure.
Careful handling protects the power tool and extends its
service life.
Cleaning and storage
Store the vacuum cleaner in its original packaging in a
clean, dry place out of children's reach.
The ideal storage temperature is between 5 and 30˚ C.
Store the cleaner in its original packaging.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
+351 965 157 064
E-mail:
support@vito-tools.com

Publicidad

loading