Yakima GroundControl Manual Del Usuario página 10

the extender kit
can be added to
either side of your
groundcontrol unit.
vertical pieces
Vertical Sleeves (x4)
Vertical
Connector
(x1)
Coupler (x6)
horiZontal pieces
Horizontal Tubes (x6)
1033348B-10/45
Extender Kit
depending upon the
Plate Screw (x2)
Wall Screw (x6)
housing
sleeve
Horizontal
Connectors (x6)
more than one
kit can be added
available space.
Wall Plate
(x2)
5/32" Hex Wrench
Foot (x1)
(FooT pAD)
Strut Clamp (x1)
groundcontrol
capacitY
accessorY
before
You begin
• The Extender Kit
increases the width of
the GroundControl by 32
inches.
• Plan out the location of
the entire unit before
assembly and installation.
• You may need one or
more Universal Mounting
Plates if the wall studs
do not align with the
installation.
• When mounting to the
wall, be sure that all three
vertical assemblies are
level before drilling holes
into wall.
• Tools required are same
as those for the Base
Unit.
Top Tube (x1)
Foot Tubes (x1)
Strut Tube (x1)
Vertical
Tube
(x2)