Yakima GroundControl Manual Del Usuario página 13

check your wall stud locations and space before assembling this product.
wall studs near corners are often spaced unpredictably and universal mounting
Plates may be required.
31
inside corner
installation
Inner corners require vertical
assemblies be attached to the wall at
26-3/4" (67.95 cm) from the corner.
• From the corner, measure 26-3/4" inches
(67.95 cm).
• Mark this measurement.
• Add 32" (81.28 cm) from the mark (away
from the corner) and mark again.
• Second mark is 58-3/4" inches (149.23 cm)
from the corner.
width of
sYsteM froM
corner is
74"/188 cm
32
outer corner installation
seconD
verTicAl
poles
3" (81.8 cm)
1033348B-13/45
FirsT
verTicAl
poles
13-3/8" (33.3 cm)
45-3/8" (115. cm)
58-3/4" (14.3 cm)
-3/4" (.5 cm)
FirsT
verTicAl
poles
outer corners require vertical
assemblies be attached to the wall at
13-3/8" from the corner.
• From the corner, measure 13-3/8" (33.97 cm).
• Mark this measurement.
• Add 32" (81.28 cm) from the mark (away from
the corner) and mark again.
• Second mark is 45-3/8" inches (115.26 cm)
from the corner.
width of
sYsteM froM
corner is
60"/153 cm
3" (81.8 cm)
seconD
verTicAl
poles