Descargar Imprimir esta página

Cramer RM1000 Manual Del Operario página 14

Ocultar thumbs Ver también para RM1000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
Installation
EN
14
CRAMERTOOLS.COM
Connect the boundary wire to the charging station as follows:
1
Remove the protective cover on the charging station and thread
the wire behind the tabs into the channel at the rear of the
charging station.
2
Press the connector onto the metal pins on the charging station
(marked with left and right arrows).
NOTE: Make sure the boundary wire to the right of the charging station
is connected to the arrow pointing right and the same for the left side.

Publicidad

loading

Este manual también es adecuado para:

Rm1500Rm2000