Cramer RM1000 Manual Del Operario página 5

Product Safety
IMPORTANT
READ CAREFULLY BEFORE USE! KEEP FOR FUTURE REFERENCE!
Training
WARNING! Automatic lawnmower! Keep away from the machine! Supervise children!
•
Read the instructions carefully. Be familiar with the controls and the proper use of the machine.
•
Never allow people unfamiliar with these instructions or children to use the machine. Local regulations may
restrict the age of the operator.
•
The operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
•
Ensure the correct installation of the boundary and guide wires as instructed.
•
Periodically inspect the area where the machine is to be used and remove all stones, sticks, wires, bones,
and other foreign objects.
•
Periodically visually inspect to see that the blades, blade bolts and cutter assembly are not worn or
damaged. Replace worn or damaged blades and bolts in sets to preserve balance.
General
•
Never operate the machine with defective guards, or without safety devices, for example the body, in place.
•
Do not put hands or feet near or under rotating parts.
•
Never pick up or carry an machine while the motor is running.
•
Remove (or Operate) the disabling device from the machine
before clearing a blockage;
-
before checking, cleaning or working on the machine.
-
•
Do not leave the machine to operate unattended if you know that there are pets, children or people in the
vicinity.
Maintenance and storage
•
Keep all nuts, bolts, and screws tight to be sure the machine is in safe working condition.
•
Replace worn or damaged parts for safety.
•
Ensure that only replacement cutting means of the right type are used.
•
Ensure that batteries are charged using the correct charger recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
•
In the event of leakage of electrolyte flush with water/neutralizing agent, seek medical help if it comes into
contact with the eyes, etc.
•
Servicing of the machine should be according to manufacturers' instructions.
EN
5
CRAMERTOOLS.COM