Descargar Imprimir esta página

Franke TX 604 V11 Manual Del Usuario página 19

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation diagram
TP 614 V11
FHC 6004 4C T XS V11
TP 613 V11
TX 604 V11
TP 513 V11
TX 302 V11
TECHNICAL INFORMATION
Type
Width
Rated voltage
Type of switch
Cooking zones (Ø, mm/kW)
Front left
Rear left
Rear right
Front right
Total power (kW)
Type
Width
Rated voltage
Type of switch
Cooking zones (Ø, mm/kW)
Front left
Rear left
Rear right
Front right
Total power (kW)
Before using the
appliance for the first time
Important warnings
All manuals and user guides at all-guides.com
Connection must be carried out by means of harmonized cables as H05V2V2-F
(90°C), or with equal or better features.
TP 614 V11
TX 604 V11
580mm
220-240 V~ or 380-415 V 2N~, 50/60 Hz
140 / 1,2
140 / 1,2
210-120 / 2,2-0,75
210 / 2,3
180 / 1,8
180 / 1,8
140 / 1,2
140 / 1,2
6,4
TP 513 V11
600mm
220-240 V~ or 380-415 V 2N~, 50/60 Hz
230-140 / 2,5-1,1
-
180 / 1,8
140 / 1,2
5,5
Clean the glass-ceramic surface with a damp cloth and some manual dishwashing
detergent. Do not use aggressive detergents such as abrasive cleaners that can
scratch the surface, abrasive dishwashing sponges, or stain removers.
• Do not turn on a cooking zone without a pan over it, and never use the cooking
hob for room heating!
• Make sure the cooking zones and pan bottom are clean and dry, and that
sufficient heat transmission is enabled between them, in order to prevent any
damage to the heating surface.
• Any fat or oil left on the cooking ones may ignite. Therefore, be careful when
using fat and oil to prepare food (e.g. French fries) and control the cooking
process at all times.
• Do not place a damp pan or a steam-covered lid on the cooking zones, as
moisture is detrimental to them.
• Do not leave a hot pan to cool down on the cooking zones, because moisture
will be generated under it, causing corrosion.
• The hob can not be activated by external timers or remote control systems.
Important warnings regarding the glass ceramic hob
• Cooking zone reaches the selected power level or temperature very quickly;
TP 613 V11
580mm
580mm
Electronic sensors
270-210 / 2,7-1,95
-
180 / 1,8
140 / 1,2
6,5
5,7
FHC 6004 4C T XS V11
Electronic sensors
210-120 / 2,2-0,75
TX 302 V11
288mm
140 / 1,2
180-120 / 1,7-0,7
-
-
2,9
580mm
140 / 1,2
180 / 1,8
140 / 1,2
6,4
19

Publicidad

loading

Este manual también es adecuado para:

Tx 302 v11Tp 613 v11Tp 513 v11Tp 614 v11Fhc 6004 4c t xs v11