While operating pneumatic tools you should
consider basic safety precautions to avoid the risk of
fire, electric shock and personal injury.
Always read the safety, operating and maintenance
instructions before you start operating your machine.
Keep the instruction manual for future reference.
It is your responsibility to follow these preventive measures
in order to ensure your own safety. Always operate the
pneumatic nail/staple gun and responsibly. In using the
machine, you accept full responsibility for any accidents
caused to third parties or their goods during its use.
The pneumatic nail/staple gun may only be operated by
people who have read the instruction manual and are
familiar with its handling. Before operating the pneumatic
nail/staple gun for the first time, users should be instructed
by the seller or any other qualified person on how to use it.
The instruction manual is considered an integral part of the
machine and must always be made available alongside the
product.
Familiarize
yourself
accessories/equipment coupled to the machine. The user
needs to know how to quickly stop the compressor or cut
off the compressed air supply to the pneumatic tool.
Stay alert and use common sense while operating a
pneumatic tool. A moment of inattention can result in
serious injury.
Do not operate the pneumatic nail/staple gun if you are not
both physically and mentally well. Do not operate it while
you are tired or under the influence of medication, drugs or
alcohol. If you have a health problem, ask your doctor if it
is safe for you to use it before doing so.
Never allow the pneumatic nail/staple gun to be operated
by children, individuals with limited physical, sensory or
mental abilities, individuals with lack of experience and
knowledge of the appliance, or others unfamiliar with the
instructions for use.
with
the
compressed
Do not overload the machine, it runs better and efficiently
within its limits indicated in the technical data table.
Use the tool correctly for each type of job. Misusing the
nail/staple
gun
accessories inappropriately can lead to dangerous
situations.
The pneumatic nail/staple gun may only be used as
stated in this instruction manual. Any other use,
which may be dangerous and may cause injury to the user
or damage to the pneumatic tool, is not permitted.
For safety reasons, any alteration to the pneumatic
nail/staple
gun
specifically authorized by the manufacturer, is prohibited.
The warranty on your pneumatic nail/staple gun will be
voided if you alter it in any way.
You may get information on authorized accessories from
your official VITO dealer.
Make sure that the pneumatic nail/staple gun is only
operated by people who are familiar with the user manual.
To ensure that you work with the pneumatic tool safely, you
should consider a few precautions and procedures before
air
start-up:
▪ Check that the pressure of the compressed air line
complies with the technical specifications of the
machine;
▪ Inspect the pneumatic nail/staple gun before each use.
Check that the accessories are installed correctly and in
good condition. In case there is excessive damage or
wear, replace them;
▪ Check that all bolts are properly tightened. Regular
inspection is important to ensure the safety issues and
good performances of the pneumatic tool.
Perform all adjustments and work necessary for the correct
assembly of the pneumatic nail/staple gun. If you have any
questions or difficulties, contact your official dealer.
for
different
purposes
other
than
installing
and
using
accessories