Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
E N G L I S H
7
Transferring the system key from
one HSM4-io to an additional
transmitter
• To carry out this function, both hand
transmitters must be within range of a
taught-in, operational io-homecontrol
product (e.g. an ESE1-io receiver/
transmitter unit with red LED on).
• On the HSM4-io hand transmitter which
is to transmit the system key, carefully
press the "KEY" button with a blunt
object for at least 3 s, max. 4 s (Fig.
- Both LEDs of this hand transmitter will
slowly flash green.
• On the HSM4-io hand transmitter which
is to receive the system key, carefully
press the "KEY" button with a blunt
object for max. 1 s (Fig.
6b
- The left LED of this hand transmitter
will slowly flash orange.
• Transfer was successful if
- the left LED of the receiving hand
transmitter lights up red for approx. 4 s.
08.2007 TR20G005-A RE
- both LEDs on the transmitting hand
transmitter light up green for 4 s.
Note
If the left LED of the receiving hand
transmitter continues to light up red
®
for approx. 4 s and/or both LEDs of
the transmitting hand transmitter flash
green, the system key was not
transferred and this procedure must
be repeated.
8.1 Resetting the HSM4-io hand
6b
).
transmitter to ex-factory settings
• Next, carefully press the "PRG" button
on the HSM4-io hand transmitter with a
blunt object for more than 5 s and then
release (Fig.
- Both LEDs of the hand transmitter will
).
first flash red quickly and then light up
red for approx. 6 s.
6a
).
8.2 Resetting the ESE1-io receiver/
transmitter unit to ex-factory
settings
• Press button "P" on the ESE1-io receiver/
transmitter unit for more than 5 s (Fig.
- The red LED will flash slowly.
7
).
17
Publicidad
Capítulos
Tabla de contenido
