Create SILKAIR CONNECT ELITE PRO Manual Del Usuario página 10

SYST E M R EQUE RIME NT S
• iOs 8.0 or higher.
• Android 4.1 or higher.
HOW TO CON N ECT TO T H E APP
1. Install the CREATE HOME app and create a user account.
2. Activate the WiFi function in the settings of your appliance.
3. The appliance must be in Standby mode.
4. Place the appliance at a distance of about 5 meters to your router.
5. Press and hold the button on the device for about 5 seconds. It will flash rapidly.
6. Launch the app and select " + ".
7. Select the "air conditioner" menu and follow the instructions on the display.
8. Once the appliance has been successfully connected, the button lights up. Now you
can operate the appliance using the app.
PROTECTION FUNCTIONS
FROST PRO TECT I ON F UNCT IO N
In cooling, dehumidifying or economic power-saving mode, if the temperature of the exhaust
pipe is too low, the air conditioner will automatically enter protection status; if the tempera-
ture of the exhaust pipe rises to a certain temperature, it can automatically revert to normal
operation.
OV E RF LOW PRO TECTI O N F UNCT IO N
When water in the water tank exceeds the warning level, the machine will automatically
sound an alarm, and the full indicator light will flash. At this point, you need to move the
drainage pipe connecting the device or the water outlet to a sewer or other drainage area
to empty the water. After the water is emptied, the device will automatically return to the
original state.
AU TOMATI C D E FROSTI NG
The machine has automatic defrosting function. Defrosting can be achieved through a four-
way valve reversing system.
C O M PR E S SOR PRO T ECT IO N F UNCT I O N
To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
E NGL I SH
10