Create SILKAIR CONNECT ELITE PRO Manual Del Usuario página 11

Warning: Before using this portable air conditioner, keep it upright for at least two hours.
• The air conditioner can be easily moved in the room. In the moving process, ensure that
the air conditioner is in the upright position and the air conditioner should be placed on
a flat surface. Do not install and use the air conditioner in the bathroom or other humid
environments.
INSTALL ATI ON OF T HE H EAT PI PE
1. Take out the outer connector assembly and the exhaust pipe
assembly, and remove the plastic bags;
2. insert the heat pipe assembly (the end of the exhaust joint)
into the back panel vent slot (push to the left) and complete
the assembly.
INSTALL ATI ON OF T HE WI ND OW SEA LI NG P L AT E
1. Half open the window and mount the window sealing plate assembly to the window. Com-
ponents can be placed in horizontal and vertical direction.
2. Pull the components of the window sealing plate assembly open, adjust their opening dis-
tance to bring both ends of the assembly into contact with the window frame, and fix the
components of the assembly.
Notes: The flat end of the exhaust pipe joints must be snapped into place. The pipe cannot be
distorted nor have substantial turning (greater than 45°). Keep the ventilation of the exhaust
pipe not blocked.
INSTALLATION AND ADJUSTMENT
E NGLI SH
11