Descargar Imprimir esta página

Celestron STARSENSE EXPLORER 12' DOBSONIAN Guía De Instalación Rápida página 7

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

13
V
O
13. Turn the primary mirror cell upside-down (V) (i.e., so the primary
mirror faces downward), align the threaded holes in the mirror
cell's perimeter with the through holes in the end of the tube,
and place the mirror cell onto the tube.
15
O
15. Place the optical tube assembly (O) onto the assembled
Dobsonian base. The side hubs on the tube should sit on the
altitude bearing cylinders on the base.
14
14. Next, install the mirror cell screws (W) through the tube and
into the cell. Do not fi rmly tighten the screws yet because you
may need to make slight adjustments to the cell's position to
precisely align the holes. Once all the screws are threaded into
the mirror cell, fi rmly tighten them in place.
16
N1
16. Install the altitude tensioning knob (N1) through the slot in the
left side panel (A1) and int o the threaded insert in the center
of the side hub on the optical tube assembly. The tensioining
knob (N1) is the one with the stepped bushing on its shaft.
W
A1
ENGLISH |
7

Publicidad

loading

Este manual también es adecuado para:

22472