Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
5
Attaching the shade
□
Place the shade (G) over the nipple (F).
□
Screw the gasket (H) onto the nipple (F) to secure
the shade (G). Take care not to screw the gasket
(H) too tight.
□ Place the cover (J) over the nipple (E).
□
Screw the finial (K) onto the nipple (E).
Care and Cleaning
□
Clean the fixture with a soft, dry cloth.
□
Do not use any cleaners with chemicals, solvents or hash abrasives.
WARNING: Before attempting to clean the fixture,
disconnect the power to the fixture by turning the
breaker off or removing the fuse from the fuse box.
Troubleshooting
Problem
The bulb will not light.
The fuse blows or circuit
breaker trips when the light is
turned on.
6
Possible Cause
The power is off.
The circuit breaker is off.
Crossed wires or power
wire is grounding out.
7
Please contact 1-855-HD-HAMPTON for further assistance.
Applying caulk
□
Caulk the space between the ceiling and the full
area of the canopy (A) to prevent water seeping
into the outlet box.
Solution
Ensure the power supply is On.
Ensure the circuit breaker is in the On position.
□
Check the wire connections.
□
Contact a qualified electrician or call the
Customer Service Team at
1-855-HD-HAMPTON.
HAMPTONBAY.COM
Publicidad
