PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in
shaded areas as these areas will not allow the batteries to fully charge and will
reduce the nighttime operating hours for your light. Ensure that the installation
location is away from other nighttime light sources such as street or porch
lamps. These light sources may prevent your solar light from automatically
turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
□
FOR FIRST TIME USE: Remove the pull tab
between the top cover (A) and the housing (D).
Use and Care Guide
Solar LED Post Cap
B
C
2
Installing the solar path light onto a post
□
Use two screws to attach the post adaptor (E or F)
firmly onto the post.
□
Attach the housing (D) to the post adaptor (E or F).
A
D
D
Part
A
400mAh, LiFePO4, 14430 rechargeable
B
battery (pre-installed)
C
D
E
F
G
D
G
E
4 x 4 Post
1
Please contact
Item #1002 643 984
Model #84044
E
Description
Top cover
Battery cover
Housing
4 x 4 post adaptor
6 x 6 post adaptor
Screw
6 x 6 Post
HAMPTONBAY.COM
for further assistance.
1-855-HD-HAMPTON
F
G
Quantity
1
1
1
1
1
1
2
D
G
F