Installation For Mac - J5create JUA310 Manual Del Usuario

INSTALLATION FOR MAC

Device Driver Installation
Installing the device driver enables your computer's operating system to
recognize the USB 3.0 Display Adapter. Be sure that you are referring to
the appropriate installation procedure before you begin installing.
※ Make sure the USB cable of USB 3.0 Display Adapter is unplugged from
your Mac Desktop or Mac Notebook before executing the setup program.
This section illustrates the device driver installation procedure for a
computer running Snow Leopard.
1. Insert the Driver CD into the CD-ROM drive
2. The installation page will be launched; To begin installation click on
start " Get Last Driver online" , please make sure the networking is
available or Choose the OS version you are using and press "Install
Driver" to start the installation
3. Click "Continue" to proceed
27