ESISTYLE Butterfly Manual De Instrucciones página 13

to the electrical network, check if voltage, frequency and
power values specified in the rating label of the appliance
are compatible with home power supply and socket.
• The power cord shall be connected to an omnipolar
magneto-thermal breaker with a switch-contact gap of at
least 3 mm.
• Means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
• In case the power cord is damaged, it shall be replaced
either by the manufacturer or the technical assistance
service or by specialized personnel.
• The power cord shall not enter into contact with surfaces
whose temperature exceeds 50° C once the appliance has
been installed.
WARNINGS FOR OPERATION
• Adequately ventilate the room when a cooker hood and
other appliances powered by energy other than electricity,
are used simultaneously (this is not applicable in case of
hoods working in the recirculation mode).
• Comply with any local standard in force on air exhaust
operations.
• If the appliance is used in the recirculation mode, make sure
the exhaust dust is in good conditions in case it was not
used for long.
13