Noaton DF 4123 HEPA Manual De Instrucciones página 50

Operation Instructions
Auto Shut off with Water Tank Full Indicator
The unit will go into standby mode when water tank is full
After emptying the tank
Except for the power button, all other buttons are invalid.
Memory Function:
a.When unplugged directly or power cut, then reconnected to the power supply, the dehumidifier will
run with the mode prior to the shutdown. The timer setting will be kept.
b.Press the power button to switch off the dehumidifier, and then press the power button to switch it
back on. The dehumidifier will run with the mode prior to the shutdown. The timer setting will be
canceled.
c.Switch off the device and unplug the power cord, then reconnect the power supply and switch on the
dehumidifier. It will run as factory preset mode the first time you received the dehumidifier.
1h 2h 4h 6h
or install the water tank properly,
8h
or the water tank is not installed properly.
the unit will go on
8
to the previous mode.