Descargar Imprimir esta página

Noaton DF 4123 HEPA Manual De Instrucciones página 52

Deshumidificador y purificador de aire

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Storage
If the dehumidifier will not be used for a long period of time, take the following steps:
1. Remove the plug from the socket and empty the tank, make the tank and the dehumidifier dry
completely, this may take a couple of days.
2. Clean the air filter .
3. Check the dehumidifier for perfect condition to ensure a safe use of it after a long period of storage.
4. Pack the device with the suitable packaging.
5. Store the dehumidifier in a dust-free and out of direct sunlight location, preferably covered with a
sheet of plastic.
Display Error Codes
Please contact local distributor if any of the error codes below appears.
Display Code
Temperature sensor error
E1
Humidity sensor error
E2
Air inlet temperature is too
high ≥42ºC
L3
Air inlet temperature is too
L4
low ≤0ºC
Error
Flash every 30 seconds
Flash every 30 seconds
Slowly flash L3
Slowly flash L4
10
Display
Machine works normally.
Machine works normally,
but can't set the humidity.
Compressor stop working,
fan works at low fan speed.
10mins later, if the
temperature decrease to
below 40
work normally.
Compressor stop working,
fan works at low fan speed.
10mins later, if the
temperature increase to
above 2
work normally.
What is happening
ºC,
machine will
ºC,
machine will

Publicidad

loading