EZiclean Cyclowash Ultimate Manual Del Usuario página 13

METHOD 2:
②
①
Re m o v e t h e c l ea n
water tank from the
brush unit by pressing
the brush unit cover.
① ①
② ②
R e m o v e t h e d i r t y
water tank from the
appliance.
Place the unit on its
storage base
It is recommended to fill the water tank by at least 1/4 and empty the dirty water tank before starting the
automatic brush cleaning. Please do not interrupt the automatic cleaning during operation. Please make
Open the cap of the
clean water tank.
EMPTY THE DIRTY WATER TANK
Turn the dirty water
tank cover to open it.
AUTOMATIC BRUSH CLEANING
Connect the appliance
to a power outlet
sure that the appliance is plugged in during automatic cleaning.
Fill the measuring cup with
clear, cold water.
Caution: Using warm or
hot water may damage
the appliance.
Remove the HEPA
filter.
Press the ON/OFF button to
start the automatic cleaning
F i l l t h e ta n k w i t h
clean water using the
measuring cup and
replace it in the brush
unit of the machine.
Empty the dirty water
tank and rinse it with
clean water.