ZALMAN ZM-SHE500 Manual De Usuario página 11

■USE as an external security HDD
(Security Mode)
1) When ZM-SHE500 is connected with PC via USB port, the front OLED
display window shows the message "The new HDD is connected. Will you use
Password?". Press <1> button on the front touch panel to set up Password.
2) LCD shows message "Enter a password for the first time". Then, please
enter your password (4~8 digits) by pressing numeric buttons on the front
panel of ZM-SHE500 and press <Enter> button to apply it.
3) It's the process to identify your password. Just enter the same password you
entered in previous (2) step and press <Enter> button to apply it. (If you enter
wrong or different password, you can't go to the next step. You have to re-start
the process again.)
4) Once the password input process is completed, the LCD will show the 16
digits Master-Key numbers for the installed HDD. LCD will show the master-
key numbers till you press any other button on ZM-SHE500.
WWW.ZALMAN.COM
Will you use Password?
0=NO, 1=YES
Enter a password first time
****
Re-enter your password
****
11