ZALMAN ZM-SHE500 Manual De Usuario página 8

■HDD Installation
1) There is a small groove near the USB3.0 port on ZALMAN ZM-SHE500.
Simply push up the back panel using your fingertip to open it.
2) Install a 2.5"SATA HDD (Check the picture on right side!)
Please check the thickness of your HDD before HDD installation.
ZM-SHE500 supports maximum 9.5mm thick 2.5" HDD models
only. In case of 12.5mm thick HDD (some new and mass
capacity models), it can't be installed in ZM-SHE500. In case of
7mm slim size HDD, it's recommendable to put additional pad or
sticker to fix HDD (not to move or shake).
8 WWW.ZALMAN.COM