General; Safety; Device Concept - Fronius RC Panel Basic Manual De Instrucciones

General

Safety

If the equipment is used or tasks are carried out incorrectly, serious injury or dam-
age may result.
► All activities described in this document must only be carried out by trained and quali-
► All functions described in this document must only be used by trained and qualified per-
► Do not carry out any of the work or use any of the functions described until you have

Device concept

The remote control can be used with the following system components:
RC Panel Basic with SpeedNet connection socket
-
RC Panel Basic /BT
-
-
-
RC Panel Basic TIG/TMC with TMC connection socket
-
-
When using the remote control, the parameters are set and functions selected depending
on the welding process and power source.
NOTE!
As a result of firmware updates, you may find that your device has certain functions
that are not described in these Operating Instructions, or vice versa.
Certain illustrations may also differ slightly from the actual controls on your device, but
these controls function in exactly the same way.
WARNING!
fied personnel.
sonnel.
fully read and understood the following documents:
this document,
all the Operating Instructions for the system components, especially the safety rules.
System components from the TPS/i series
System components from the TPS/i series
System components from the TT/MW series (with Bluetooth function)
Only in certified countries
System components from the TT/MW series (with TMC connection socket)
System components from the TP series (with TMC connection socket)
27