Control Elements On The Rc Panel Basic, Rc Panel Basic /Bt, Rc Panel Basic Tig /Tmc; Adjuster Functions During Mig/Mag Welding; Adjuster Functions During Electrode Welding - Fronius RC Panel Basic Manual De Instrucciones

Mando a distancia
Ocultar thumbs Ver también para RC Panel Basic:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 63
Control elements on the RC Panel Basic, RC Panel
Basic /BT, RC Panel Basic TIG /TMC
General
See the power source Operating Instructions for more details of the welding param-
eters listed below.
Adjuster func-
The adjuster performs different functions depending on the welding process.
tions during MIG/
MAG welding
(2)
Adjuster func-
tions during elec-
trode welding
30
NOTE!
(1)
-
Correcting the arc length
(during MIG/MAG synergic welding - Standard, Puls, PMC, LSC)
- = shorter arc length
0 = neutral arc length
+ = longer arc length
-
Setting the welding voltage
(during MIG/MAG standard manual welding)
(1)
(1)
-
Setting the welding power
(during MIG/MAG synergic
welding - Standard, Puls,
PMC, LSC)
-
Setting the wire feed speed
(during MIG/MAG standard
manual welding)
(2)
(1)
Setting the welding current
(2)
Influencing the arc-force dynam-
ic:
-
0 = soft, low-spatter arc
-
10 = harder, more stable arc
(2)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rc panel basic /btRc panel basic tig /tmcRc panel standard

Tabla de contenido